Windows 9x is NOT officially supported under DOSBox. AUDIO The audio card emulated by Dos Box is a Sound Blaster 16. Only HAL9000 DOSBox build can autodetect image parameters. (THIS IS NOT RECOMMENDED) Windows 95 Download Tweak UI for Windows 95. Select "Disable Scandisk after bad shutdown" If you receive the following error message then either your IMGMOUNT settings or your image are incorrect: "Message SU0013 Setup cannot create files on your startup drive and cannot setup Windows 98." ----------------------------------------------------------------------------------- Attached are 4 2GB images created using IMGMAKE from HAL9000 Megabuild (Thanks HAL! These images are provided so that you do not need to bother with creating, partitioning, formatting and making bootable your own image. IMG parititioned with MS-DOS 6.22 FDISK into one Primary.
Description: Code Integrity is unable to verify the image integrity of the file \Device\Harddisk Volume2\Windows\System32\drivers\asw because the set of per-page image hashes could not be found on the system.
USE NO OTHER PARAMETERS WINDOWS ME DOES NOT WORK IN DOSBOX. Downloads Needed: Latest DOSBox version (DOSBox 0.74 as of this guide) or DOSBox SVN (7-23-2011 as of this guide) HAL9000 Megabuild v6 Gulikoza or Yhkwong DOSBox build (for Glide support) Winimage\Im Disk or equivalent Win Pcap (for builds of DOSBox with NE2000 support) GENERIC WINDOWS 9x INSTALLATION INSTRUCTIONS *WITH WINDOWS 95B YOU WILL EXPERIENCE DIALOG ERRORS DURING INSTALL. This is due to the video driver that Windows 9x is trying to use (it's not compatible with the video card that DOSBox emulates) Change the color depth to 16 colors until you can install a better graphics driver. Go into Device Manager and install the Voodoo driver. Do a "Copy *.* D:xinst" to copy your Windows files to the HD image.
For some Windows versions you may have video corruption when you boot to the desktop. (It should install "PCI bus" which is needed for the Voodoo card) 10. IMG USING DOSBOX (Not recommended due to DOSBox appearing to hang and being very slow at copying the files) Close DOSBox Edit imgmount like in to look like this: imgmount d -t hdd -size 512,63,x,x Open DOSBox Type in "Mount c ." to mount your host DOSBox directory. Switch to "C:" and go to where you copied your Windows files.
Create a Hard Drive image by typing "Imgmake -t hd_2gig -nofs -bat" inside of DOSBox. Execute Dos Box and type in "Boot -l c" to boot your HD image. Go to the directory on the image where you copied Windows and type in "setup /is" to install Windows. When setup is done copying Windows files it will close DOSBox. Start DOSBox and run the command "boot -l c" again to resume setup. When setup is done it will go straight to the Windows desktop and you are done installing! INSTALLATION ERRORS DOSBox 0.74 and 7-23-2011 SVN Windows 98SE Will throw up error during "Updating System Settings".
(or you could mount the image with DOSBox and copy the files over but DOSBox may become unresponsive so you may think it froze...using a program like Winimage you will see a progress bar or similar so you know that it's actually working) 18. Shut down DOSBox and make a backup of the image so you don't have to reinstall again.